Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
电气工程     
含极间填充块的高速表贴式永磁同步电机转子强度分析
陈亮亮1,祝长生1,蒋科坚2
1.浙江大学 电气工程学院,浙江 杭州310027；2.浙江理工大学 信息学院, 浙江 杭州310018
Rotor strength analysis for high speed surface mounted permanent magnet synchronous motor with filled blocks between magnetic poles
CHEN Liang liang1,ZHU Chang sheng1,JIANG Ke jian2
1.College of Electrical Engineering, Zhejiang University, Hangzhou 310027,China; 2.School of Informatics and Electronics, Zhejiang Sci Tech University, Hangzhou 310018, China
 全文: PDF(2575 KB)   HTML
摘要：

针对含极间填充块的高速表贴式永磁同步电机(SPMSM) 缺乏转子强度解析解的问题,将转子受力状况简化为平面应力问题,采用极坐标下的应力函数法和位移法,推导转子强度的解析公式.分别采用解析解和有限元法分析含极间填充块的高速表贴式永磁同步电机的转子强度.在转子强度解析解的基础上,进一步研究转速、护套厚度和过盈量对转子强度的影响,分析转子强度的变化规律.结果表明：解析解和有限元法的计算结果相吻合,解析解能准确计算电机转子的应力和位移.转速、护套厚度以及过盈量都对转子强度有重要影响,护套厚度和过盈量需要与最高转速相匹配才能使转子强度满足要求.
Abstract:

As for the problem of no analytical solution for the rotor strength of  high speed surface mounted permanent magnet synchronous motor (SPMSM) with filled blocks between magnetic poles, the rotor stress condition was simplified as a plane stress problem, and the analytical formulae for rotor strength was proposed based on the stress function method and the displacement method in polar coordinates. The rotor strength of a high speed SPMSM with filled blocks between magnetic poles was analyzed by presented analytical solution and finite element method, respectively. The effects of rotational speed, enclosure thickness and shrink range on rotor strength were further investigated based on the analytical solution of rotor strength, and the variation of rotor strength was analyzed. The results calculated by the analytical solution and finite element method are in good agreement with each other, and the analytical solution can predict the stress and displacement of the motor rotor accurately. Rotational speed, enclosure thickness and shrink range all have important effects on rotor strength. The enclosure thickness and shrink range should match the maximum speed of revolution in order to ensure the rotor strength meet the requirements．
出版日期: 2015-10-15
:  TM 351  
基金资助:

国家自然科学基金资助项目(51477155, 11172261,11272288)；浙江省自然科学基金资助项目(LZ13E070001)；先进航空发动机协同创新中心资助项目.
通讯作者: 祝长生，男，教授，博导. ORCID: 0000 0002 0127 8595.     E-mail: zhu_zhang@zju.edu.cn
作者简介: 陈亮亮(1984-)，男，博士生，从事高速永磁电机设计研究.ORCID: 0000 0002 7727 2050. E-mail: chenlian0510@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

陈亮亮,祝长生,蒋科坚. 含极间填充块的高速表贴式永磁同步电机转子强度分析[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008 973X.2015.09.017.

CHEN Liang liang,ZHU Chang sheng,JIANG Ke jian. Rotor strength analysis for high speed surface mounted permanent magnet synchronous motor with filled blocks between magnetic poles. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008 973X.2015.09.017.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008 973X.2015.09.017    或    http://www.zjujournals.com/eng/CN/Y2015/V49/I9/1738

［1］ 唐任远. 稀土永磁电机发展综述［J］. 电气技术，2005, 5(4): 1-6．
TANG Ren yuan. Summary of development of rare earth permanent magnet motor ［J］. Electrical Technology, 2005, 5(4): 1-6．
［2］ 唐任远,赵清,周挺. 稀土永磁电机正进入大发展的新时期［J］. 沈阳工业大学学报, 2011, 33(1): 1-8．
TANG Ren yuan,ZHAO Qing,ZHOU Ting. Rare earth permanent magnet electrical machines stepping a new period of rapid development ［J］. Journal of Shenyang University of Technology, 2011, 33(1): 1-8．
［3］ 王凤翔. 高速电机的设计特点及相关技术研究［J］. 沈阳工业大学学报, 2006, 28(3): 258-264．
WANG Feng xiang. Study on design feature and related technology of high speed electrical machines ［J］. Journal of Shenyang University of Technology, 2006, 28(3): 258-264．
［4］ BOCHENKOV B, LUTZ S. A review of modern materials of permanent magnets ［C］ ∥ Proceedings of 8th Korea Russia International Symposium on Science and Technology, Tomsk: Institute of Electrical and Electronics Engineers Computer Society, 2004: 201-203．
［5］ KOLONDZOVSKI Z, BELAHCEN A, ARKKIO A. Comparative thermal analysis of different rotor types for a high speed permanent magnet electrical machine ［J］. IET Electric Power Applications, 2009, 3(4): 279-288．
［6］ HONG D, WOO B, KOO D. Rotor dynamics of 120 000 r/min 15 kW ultra high speed motor ［J］. IEEE Transactions on Magnetics, 2009, 45(6): 2831-2834．
［7］ BAILEY C, SABAN D M, GUEDES PINTO P. Design of high speed direct connected permanent magnet motors and generators for the petrochemical industry ［J］. IEEE Transactions on Industry Applications, 2009, 45(3): 1159-1165．
［8］ CHO H, JANG S, CHOI S. A design approach to reduce rotor losses in high speed permanent magnet machine for turbo compressor ［J］. IEEE Transactions on Magnetics, 2006, 42(10): 3521-3523．
［9］ 王继强,马俊强,李连春. 高速永磁电机转子护套强度分析［J］. 沈阳化工学院学报, 2009, 23(1): 46-49．
WANG Ji qiang,MA Jun qiang,LI Lian chun. Enclosure strength analysis for the rotor of a high speed permanent magnet machine ［J］. Journal of Shenyang University of Chemical Technology, 2009, 23(1): 46-49．
［10］ 王继强,王凤翔,鲍文博. 高速永磁电机转子设计与强度分析［J］. 中国电机工程学报, 2005, 25(15): 140--145．
WANG Ji qiang,WANG Feng xiang,BAO Wen bo. Rotor design and strength analysis of high speed permanent magnet machine ［J］. Proceedings of the CSEE, 2005, 25(15): 140-145．
［11］ 程文杰,耿海鹏,冯圣. 高速永磁同步电机转子强度分析［J］. 中国电机工程学报, 2012, 32(27): 87-94．
CHENG Wen jie,GENG Hai ping,FENG Sheng. Rotor strength analysis of high speed permanent magnet synchronous motors ［J］. Proceedings of the CSEE, 2012, 32(27): 87-94．
［12］ BORISAVLJEVIC A, POLINDER H, FERREIRA J A. On the speed limits of permanent magnet machines ［J］. IEEE Transactions on Industrial Electronics, 2010, 57(1): 220-227．
［13］ 王保俊,毕刘新,陈亮亮,等. 碳纤维绑扎表贴式高速永磁电机转子强度分析［J］. 浙江大学学报:工学版. 2013, 47(12): 2101-2110．
WANG Bao jun,BI Liu xin,CHEN Liang liang. Strength analysis of a surface mounted high speed permanent magnetic machine rotor with carbon fiber bandage ［J］. Journal of Zhejiang University:Engineering Science. 2013, 47(12): 2101-2110．
［14］ BINDER A, SCHNEIDER T, KLOHR M. Fixation of buried and surface mounted magnets in high speed permanent magnet synchronous machines ［J］. IEEE Transactions on Industrial Electronics, 2006, 42(4): 1031-1037．
［15］ 赵学仁. 工程弹性力学［M］. 北京: 北京理工大学出版社, 1988: 95-98．
[1] 宁银行, 刘闯, 干兴业. 两级式无刷混合励磁同步电机的电磁设计及分析[J]. 浙江大学学报(工学版), 2016, 50(3): 519-526.
[2] 张晗妮, 张琪, 黄苏融, 张舟云. 计及轴承传热的高密度永磁电机温升计算[J]. 浙江大学学报(工学版), 2015, 49(12): 2410-2417.
[3] 左曙光,张国辉,吴旭东,高丽华,沈健. 倾斜偏心下轮毂永磁同步电机电磁力分析[J]. 浙江大学学报(工学版), 2015, 49(5): 901-907.
[4] 陈亮亮,祝长生,王萌. 碳纤维护套高速永磁电机热态转子强度[J]. 浙江大学学报(工学版), 2015, 49(1): 162-172.
[5] 肖文生,崔俊国,刘健,吴晓东,黄红胜. 直驱采油用永磁同步电机削弱齿槽转矩优化[J]. 浙江大学学报(工学版), 2015, 49(1): 173-180.
[6] 左曙光,张国辉,吴旭东,高丽华,沈健. 倾斜偏心下轮毂永磁同步电机电磁力分析[J]. 浙江大学学报(工学版), 2014, 48(12): 1-7.
[7] 韩汇文,祝长生. 表贴式永磁电机电枢反应磁场的子域模型[J]. 浙江大学学报(工学版), 2014, 48(9): 1682-1689.
[8] 肖文生,崔俊国,刘健,吴晓东,黄红胜. 直驱采油用永磁同步电机削弱齿槽转矩优化[J]. 浙江大学学报(工学版), 2014, 48(8): 1-8.
[9] 薛劭申, 许海平, 方程, 牛威昆, 薛 山. 基于载波的多相永磁同步电机谐波平面控制[J]. J4, 2013, 47(12): 2080-2086.
[10] 王保俊, 毕刘新, 陈亮亮, 杨平西, 祝长生. 碳纤维绑扎表贴式高速永磁电机转子强度分析[J]. J4, 2013, 47(12): 2101-2110.
[11] 蔡炯炯, 卢琴芬, 刘晓, 叶云岳. PMLSM推力波动抑制分段斜极方法研究[J]. J4, 2012, 46(6): 1122-1127.
[12] 孙晓东,陈龙,杨泽斌,朱熀秋,嵇小辅. 贝叶斯证据框架下LS-SVM的BPMSM磁链建模[J]. J4, 2012, 46(5): 873-877.
[13] 张玉秋, 刘晓, 叶云岳, 金勇. 双边空心式永磁直线伺服电机的横向边缘效应[J]. J4, 2011, 45(10): 1836-1841.
[14] 吴克元,刘晓,叶云岳. 平板型混合式直线步进电机的关键参数[J]. J4, 2011, 45(9): 1603-1608.
[15] 崔巍,龚宇,江建中,章跃进,杜世勤. 双凸极永磁电机的对称化设计[J]. J4, 2011, 45(5): 825-830.